Fitch fastenerStandard
Pickard Hardware, pH Suite · SS4460 · locking SS4470
The cam fastener at the meeting rail that pulls the two sashes together as it closes. Brass and non-locking as standard; the locking pattern where an insurer asks for key-locking windows. Also made in a traditional pattern and, by Croft, as a premium alternative.
FinishesPolished brass, Antique brass, Satin brass, Rumbled brass, Bronze, Black, Satin chrome, Polished chrome, Satin nickel, Polished nickel, Rumbled pewter
Sash lift and sash eyeStandard
Pickard Hardware, pH Suite · SS4700 · sash eye SS4730
One or two curled lifts on the bottom rail according to the width of the sash; a sash eye and pole where the top sash is out of reach. A D-handle is made for wider sashes.
FinishesPolished brass, Antique brass, Satin brass, Rumbled brass, Bronze, Black, Satin chrome, Polished chrome, Satin nickel, Polished nickel, Rumbled pewter
Axle pulleyStandard
Pickard Hardware, pH Suite · SS3680 (2") · SS3510 (1¾")
A ball-bearing wheel behind a brass face, let into the pulley stile; the red-spot waxed cord runs over it to the cast-iron weight in the box. Two-inch wheels on heavy sashes, one-and-three-quarter on lighter ones.
FinishesPolished brass, Antique brass, Satin brass, Rumbled brass, Bronze, Black, Satin chrome, Polished chrome, Satin nickel, Polished nickel, Rumbled pewter
No picture yet
Sash cord and weightsStandard
Pickard Hardware · Waxed cord SS4025 (6 mm) · SS4045 (7 mm)
Red-spot waxed cotton cord over the pulleys, and cast-iron weights sized at the bench to each sash so that it stays wherever it is left. Replaced like for like on a refurbishment.
No picture yet
Spring balance
Mighton Products
Where there is no room for a weight box, a pair of spring balances carries each sash in a slim frame. Specified by sash weight and set up at the bench.
Maker’s page →
Flush-fit sash stop
Pickard Hardware, pH Suite · SS4980 · push-twist SS5640
A restrictor let flush into the sash stile that holds the window at a set opening; turned with a key, or the push-twist pattern that needs none. The usual answer where a first-floor sash must not open wide.
FinishesPolished brass, Antique brass, Satin brass, Rumbled brass, Bronze, Black, Satin chrome, Polished chrome, Satin nickel, Polished nickel, Rumbled pewter
No picture yet
Yorkshire sash fittings
Pickard Hardware · SS4310 (600 mm) · SS4320 (900 mm) · sash screw SS4660–SS4680
The running gear for a horizontal sliding sash, in satin anodised aluminium, 600 or 900 mm, with a sash screw to lock it, a 125 mm handle and a push-and-twist stop. A fitch fastener set upright brings the full range of finishes.